Technologies and Services

This silencing system focuses on the fact that sound comes in waves, and splits the original sound into two paths with differing lengths to reduce noise through superimposition with the confluent section.

Self- developed acoustic analysis sofrware utilizes to design optimal(in terms of cost and pressure loss) sound-reducing systems with performance requirements.

The resonant-type silencer is a sound dampening system that alters the phases of sound and then synthesizes them to utilize their property of mutually canceling each other.

Active Noise Control measures sound defected in paths and applies a reverse-phase sound to cancel.

By examining the off-site noise generated by outdoor units, Taikisha designs optimal sound-reducing systems (in terms of cost and pressure loss) to meet the performance requirements.

Taikisha concluded an agreement with Kansai University to implement noise barriers applying the edge-effect suppression theory. Based on these principles, we developed a soundproofing system for air conditioner outdoor units.

Vege-factory is a fully artificially-lit, hydroponic plant factory; and the only system in the world which facilitates mass-growing of crisphead (iceberg) lettuce.

HYPER DRYDECO is corrosion-inhibiting hydrogen peroxide-based decontamination system.

Integrated monitoring system is efficient integrated system that combines central monitoring, environmental monitoring, and room pressure control systems which has been manufactured and operated separately previously.

Taikisha supports validation measurement tasks for air conditioning equipment. Alternation of the measured data is prevented from tampering with the measurement data, while greatly reducing time for summarizing data or writing reports.

This pressure regulator control system can maintain optimum conditions when activating production devices or air conditioning systems that tends to lead to a reversal of the differential pressure between rooms, or even when changing the air volume mode.

Aquavent・markⅡ resolves faults caused by air mixed into piping.

Cogeneration system recovers exhaust heat from a motor that drives a generator, and then effectively utilizes it as a heat source.

Eco-Rac^® is a heat recovery system that completely prevents exhaust-gas contaminants from getting into the air supply. It is perfect for saving energy in the production of semiconductors or medical products.

Overhead conveyor with hanger system for use in the pretreatment and electrodeposition processes. Chain conveyors are used for the treatment process itself, whereas Friction conveyors are used before and after the treatment process.

Pendulum conveyor is a skid-type overhead conveyor applied to pretreatment and electrodeposition processes.

It is a tact type conveyor by using electrical motor and electrical hoist.This overhead type conveyor has a lifting function and a traveling function separately.

E-DIP^® is a conveyor for automobile line pretreatment and electrodeposition equipment. E-DIP^® is a self-propelled carrier that travels on the side of the device to lift and transport the automobile body.

This conveyor is a tact-type floor-type conveyor system that combines multiple operations applied to the pretreatment and electrodeposition processes. The series is divided according to the weight of the automobile body and the application (swing / rotation).

This is a rotary conveyor system that can improve coating quality in pretreatment and electrodeposition processes, shorten the process length, and reduce running costs

Mono-Track conveyor is a hanger type overhead conveyor applied to the undercoat process.

Pallet conveyor is an overhead pallet conveyor applied in the undercoat process.

FLC Mono-Track conveyor is a trolley type floor type conveyor that is applied to the painting process, drying process, and work process.

This conveyor is a skid floor conveyor for painting processes, ovens and workplaces.

By equipping the exhaust ports of our exhaust systems to include exhaust hoods with auxiliary jets, Taikisha's exhaust systems with an auxiliary jet prevent air taken-in from dispersing, to achieve a higher air concentration, which in turn allows for exhaust with minimal air volume.

Taikisha has developed our direct-expansion HVAC that contains an inverter condensing unit and it is applicable to facilities where no central heating facility is equipped.

By maintaining a high degree of cleanliness of the internal air, this emergency shelter is effective in reducing the risk of novel-coronavirus infection.

Utilizing a counter flow, this system reduces the number of defective points caused by stagnating dust on the surface of an automobile body, by expelling the motes introduced with the body from the tank.

Taikisha's rinse systems achieve a high paint recovery rate with UF(Ultra-Filtration) or RO(Reverse Osmosis).

This control technology uses a direct expansion system to further reduce environmental impact. This reproduces natural environmental conditions in test chambers with high accuracy.

This system supplies air to engines at a constant temperature and humidity during an engine unit test.

A wind tunnel is used to artificially generate wind. By measuring the aerodynamic characteristics in a wind tunnel, data for product development and design can be obtained.

Heat source optimal control system maximizes the impact of energy saving for the entire system with optimized real-time setting values.

A heat storage tank is in the form of heat in an underground or aboveground water tank. It stores inexpensive night-time power, and utilizes it during the daytime, the peak hours of heat demand.

Taikisha provides louvers that drastically improve the effectiveness of design, functionality, and earthquake resistance.

Air fuse draws in ambient air to make it usable for ventilation and air-conditioning.

Clean Diffuser creates optimal airflow with a minimized ventilation frequency by dispersing air exiting from the HEPA outlet, which has the effect of imitating airflow distributed from across the whole surface of the ceiling.

Taikisha's design and construction technologies allow us to select equipment and materials with few chemical contaminants to meet our customers' needs, and to quickly remove chemical contamination occurred during construction work.

"Air Infection Block Plus," a transportable high-performance air barrier unit that can reduce the risk of exposure to the virus infection simply through installation in a required place such as when Healthcare professional performs medical procedures with patients in face-to face or when medical examinations via specimen collection for PCR tests, etc.

Air Lock Booth has acquired a good reputation for being an easy-to-handle booth that faultlessly prevents bacteria from spreading during examination and sputum collection, while blocking intrusion by external bacteria, to prevent mass infection in hospitals.

High roof factory air-conditioning system improves both comfort and energy-saving performance by applying local-air-conditioning system to occupied areas in large spaces.

Spot cooling technology focuses the air conditioning in a large factory space only around the workers.

Sock chilling system creates uniform indoor airflows by passing the air through a cloth filter.

For manufacturing systems that require high-performance positioning, and precision measurement systems, Spacefine, with a direct expansion coil and hot gas reignition, provides energy saving, low cost, and high precision solutions.

Dry decoration technology provides the exteriors of automobiles with film decoration (dry decoration) by applying films through vacuum-pressure molding technology instead of the conventional spray coating (wet coating).

Taikisha's energy-saving HVAC system automatically determines an optimal control point in accordance with the outdoor temperature and selects the best energy-saving operation mode.

Our solution is to recycle exhaust from a paint booth and reduce air-conditioning energy consumption. By introducing heat pumps to the heat source of the recycling HVAC system, we aim to further achieve energy conservation and CO₂ reduction.

With water-based paint flash-off facilities as well, its cost-efficient performance is well proved because it allows you to skip the cooling process that usually takes place after the flash-off process.

Dust particles in exhaust gases are always an obstacle to the VOC treatment and the recycling of booth exhaust. Our S-1 circular is a wet paint booth that uses water with the venturi effect.

This is a dry paint booth that uses both precoating agents and dry filters. These booths are particularly effective in regions with insufficient water, as they do not use water to collect paint mist as in wet booths.

This is a dry paint booth with a simple dust removal system using a dry filter. It uses no water, and so it is particularly effective in places where water is scarce.

This is a modularized painting unit. It can be flexibly placed in any direction. Making the most of this feature can help achieve line designs that will realize great energy and space saving.

Compact type paint booth minimizes the height of the scrubbing chamber, while ensuring optimal dust removing performance and serviceability.

This system records deflection by water vapor or threads on remote cameras and analyzes it to allow control of the booth air supply and exhaust.

Our Symmetry Oven can raise the temperature of difficult to heat areas in the kiln, such as the outer sill at the bottom of the body, the bases of pillars, and the front floor, within a shorter period of time than traditional kilns.

i-CEO system places the conveyor on the outside of the drying oven compartment to prevent the dust or oil of the conveyor from entering and staining the drying oven.

Our new air seal at the opening of the flat type oven greatly reduces heat loss compared to conventional air seals.

Taikisha's pre-treatment system enables you to efficiently remove iron particle that is the cause of the defect.

I-LAS (Impact Blast Washer System) is Taikisha's high-performance water washing system. Our unique design standard helps develop a system to efficiently remove iron particle from body surfaces with an optimally minimized water amount and pressure and contributes to reducing dirt or dust.

The use of microbubbles in the degreasing and cleaning process (pre-cleaning process) provides an efficient degreasing system.

Up to now, electrodeposition resulted in wastewater, but recycling water used in washing after the forming process not only cuts the amount of wastewater, but also reduces the cost of manufacturing DI water(de-ionized water) for use in washing.

i-Navistar is an IoT and AI-based root cause analysis system for analyzing causes of suspended operation and quality defects on automotive paint lines using various sensing data.

In painting automobiles, sealing is applied for waterproof and rust prevention along joins on the underside of floors. Furthermore undercoat is applied to prevent scratches from stones while moving, stains, and corrosion. For both process, Taikisha offers optimized paint control system that are very efficiently automated.

The system uses high-precision visual detection to automate the sealing of the edges of the part of the body called the cover from the operating trajectory.

Interior sealing application of the automobile body has been automated. Taikisha has increased the density of robots and maximized their operating efficiency, to achieve application in the shortest time possible, with no waste.

LASD Application uses stainless steel for contact parts to cope with water-based materials and adopts a rotary gun. Robot arms enter the interior and paint without creating dust, enabling waste-free application of material.

Motorizing the pressure pumps means less energy consumption, less noise during operation, fewer oil leaks, and less condensation compared to traditional pneumatic or hydraulic systems.

Charging painting machines with the minimum paint required reduces paint losses. This system also can handle either water-based or solvent types.

The system can handle both upper and lower surfaces and a broad painting area for large jobs.

Zero Clear Coating removes stains with only water while maintaining the same level of quality. Taikisha is steadily employing these special coating properties for products that present a major burden for cleaning when used in painting factories.

The paint feeding flow control system automatically controls the paint flow rate so that only the required amount is used at the required time, contributing to conserving energy and reducing VOCs.

This is a radical change from working in paint booths full of paint mist. Painting with 100% transfer efficiency drastically reduces the environmental measures and running costs required, minimizes painring compact and reduces the burden of cleaning tasks.

Taikisha supplies paint finishing systems that can draw letters and graphics through controlled particle-by-particle discharge of paint particles.

i-ART (automatic teaching system) provides high-precision teaching easily and in a short time frame.

i-Sanding (automatic sanding system) is a high-speed, high-quality, sanding system. It has high-speed sensing in real time for feedback control of the force and position of the tool and the sanding load.

By using force sensors and a newly developed bracket, it is possible to automate the inspection with direct contact the same as workers, without scratching the painted surface.

Taikisha offers automation of the surface inspection usually conducted visually by workers after painting is completed.

Taikisha has a range of the main equipment required for painting lines to provide to our customers, including painting machines, gear pumps, CCV, paint guns, and dozers.

Our dry room systems have been adopted in many sectors such as in the assembly process of lithium batteries and other electronics and precision apparatus industries.

This is a revolutionary system which achieves drastic energy savings and a high level of environmental friendliness by recovering NMP(N-Methyl-2-Pyrrolidone) used in the manufacturing process of lithium-ion batteries.

This system cleans up organic solvents, cleaning solvents, and malodorous gases, using adsorbing materials and oxidative decomposition equipment. Fibrous activated charcoal and hydropholic sysntheic zeolite are used as the adsorbing materials.

RTO(Regenerative Thermal Oxidizer) is energy-saving system that oxidizes and decomposes VOCs (Volatile Organic Compounds) at 850℃ or higher. It is suitable for the treatment of high concentration gases and for use as a post-treatment unit to Admat.

Rotary RTO includes a regenerative heat exchanger with rotary changeover valves. Horizontal Rotary RTO is new type of RTO with significantly reduced unit height by having a switching valve installed on the side of the conventional RTO main unit.

Cataburn^® has an especially great effect on the treatment of difficult-to-reuse mixed solvent gases and malodorous gases. It can also be effectively used as post-treatment system to Admat^®C/Admat^®Z.

Odret can handle gases with any component and concentration, and oxidize and decompose almost every harmful or malodorous component with a high treatment efficiency and consistency.

Taikisha offers highly efficient and economical odor control devices for paint-drying oven exhaust and VOC treatment systems for paint booth exhaust.

Active Noise Control measures sound defected in paths and applies a reverse-phase sound to cancel.

This system cleans up organic solvents, cleaning solvents, and malodorous gases, using adsorbing materials and oxidative decomposition equipment. Fibrous activated charcoal and hydropholic sysntheic zeolite are used as the adsorbing materials.

Air fuse draws in ambient air to make it usable for ventilation and air-conditioning.

"Air Infection Block Plus," a transportable high-performance air barrier unit that can reduce the risk of exposure to the virus infection simply through installation in a required place such as when Healthcare professional performs medical procedures with patients in face-to face or when medical examinations via specimen collection for PCR tests, etc.

Air Lock Booth has acquired a good reputation for being an easy-to-handle booth that faultlessly prevents bacteria from spreading during examination and sputum collection, while blocking intrusion by external bacteria, to prevent mass infection in hospitals.

Self- developed acoustic analysis sofrware utilizes to design optimal(in terms of cost and pressure loss) sound-reducing systems with performance requirements.

Aquavent・markⅡ resolves faults caused by air mixed into piping.

i-ART (automatic teaching system) provides high-precision teaching easily and in a short time frame.

By maintaining a high degree of cleanliness of the internal air, this emergency shelter is effective in reducing the risk of novel-coronavirus infection.

Cataburn^® has an especially great effect on the treatment of difficult-to-reuse mixed solvent gases and malodorous gases. It can also be effectively used as post-treatment system to Admat^®C/Admat^®Z.

Utilizing a counter flow, this system reduces the number of defective points caused by stagnating dust on the surface of an automobile body, by expelling the motes introduced with the body from the tank.

Taikisha's design and construction technologies allow us to select equipment and materials with few chemical contaminants to meet our customers' needs, and to quickly remove chemical contamination occurred during construction work.

Clean Diffuser creates optimal airflow with a minimized ventilation frequency by dispersing air exiting from the HEPA outlet, which has the effect of imitating airflow distributed from across the whole surface of the ceiling.

Cogeneration system recovers exhaust heat from a motor that drives a generator, and then effectively utilizes it as a heat source.

Compact type paint booth minimizes the height of the scrubbing chamber, while ensuring optimal dust removing performance and serviceability.

By using force sensors and a newly developed bracket, it is possible to automate the inspection with direct contact the same as workers, without scratching the painted surface.

Our dry room systems have been adopted in many sectors such as in the assembly process of lithium batteries and other electronics and precision apparatus industries.

With water-based paint flash-off facilities as well, its cost-efficient performance is well proved because it allows you to skip the cooling process that usually takes place after the flash-off process.

Taikisha has developed our direct-expansion HVAC that contains an inverter condensing unit and it is applicable to facilities where no central heating facility is equipped.

This is a dry paint booth that uses both precoating agents and dry filters. These booths are particularly effective in regions with insufficient water, as they do not use water to collect paint mist as in wet booths.

This is a dry paint booth with a simple dust removal system using a dry filter. It uses no water, and so it is particularly effective in places where water is scarce.

Eco-Rac^® is a heat recovery system that completely prevents exhaust-gas contaminants from getting into the air supply. It is perfect for saving energy in the production of semiconductors or medical products.

E-DIP^® is a conveyor for automobile line pretreatment and electrodeposition equipment. E-DIP^® is a self-propelled carrier that travels on the side of the device to lift and transport the automobile body.

It is a tact type conveyor by using electrical motor and electrical hoist.This overhead type conveyor has a lifting function and a traveling function separately.

Taikisha's energy-saving HVAC system automatically determines an optimal control point in accordance with the outdoor temperature and selects the best energy-saving operation mode.

This system supplies air to engines at a constant temperature and humidity during an engine unit test.

By equipping the exhaust ports of our exhaust systems to include exhaust hoods with auxiliary jets, Taikisha's exhaust systems with an auxiliary jet prevent air taken-in from dispersing, to achieve a higher air concentration, which in turn allows for exhaust with minimal air volume.

Taikisha offers automation of the surface inspection usually conducted visually by workers after painting is completed.

Charging painting machines with the minimum paint required reduces paint losses. This system also can handle either water-based or solvent types.

FLC Mono-Track conveyor is a trolley type floor type conveyor that is applied to the painting process, drying process, and work process.

This conveyor is a tact-type floor-type conveyor system that combines multiple operations applied to the pretreatment and electrodeposition processes. The series is divided according to the weight of the automobile body and the application (swing / rotation).

Heat source optimal control system maximizes the impact of energy saving for the entire system with optimized real-time setting values.

The system uses high-precision visual detection to automate the sealing of the edges of the part of the body called the cover from the operating trajectory.

High roof factory air-conditioning system improves both comfort and energy-saving performance by applying local-air-conditioning system to occupied areas in large spaces.

Motorizing the pressure pumps means less energy consumption, less noise during operation, fewer oil leaks, and less condensation compared to traditional pneumatic or hydraulic systems.

HYPER DRYDECO is corrosion-inhibiting hydrogen peroxide-based decontamination system.

This system records deflection by water vapor or threads on remote cameras and analyzes it to allow control of the booth air supply and exhaust.

i-CEO system places the conveyor on the outside of the drying oven compartment to prevent the dust or oil of the conveyor from entering and staining the drying oven.

Taikisha supplies paint finishing systems that can draw letters and graphics through controlled particle-by-particle discharge of paint particles.

This is a radical change from working in paint booths full of paint mist. Painting with 100% transfer efficiency drastically reduces the environmental measures and running costs required, minimizes painring compact and reduces the burden of cleaning tasks.

I-LAS (Impact Blast Washer System) is Taikisha's high-performance water washing system. Our unique design standard helps develop a system to efficiently remove iron particle from body surfaces with an optimally minimized water amount and pressure and contributes to reducing dirt or dust.

i-Navistar is an IoT and AI-based root cause analysis system for analyzing causes of suspended operation and quality defects on automotive paint lines using various sensing data.

Integrated monitoring system is efficient integrated system that combines central monitoring, environmental monitoring, and room pressure control systems which has been manufactured and operated separately previously.

Interior sealing application of the automobile body has been automated. Taikisha has increased the density of robots and maximized their operating efficiency, to achieve application in the shortest time possible, with no waste.

Taikisha's pre-treatment system enables you to efficiently remove iron particle that is the cause of the defect.

i-Sanding (automatic sanding system) is a high-speed, high-quality, sanding system. It has high-speed sensing in real time for feedback control of the force and position of the tool and the sanding load.

LASD Application uses stainless steel for contact parts to cope with water-based materials and adopts a rotary gun. Robot arms enter the interior and paint without creating dust, enabling waste-free application of material.

Taikisha provides louvers that drastically improve the effectiveness of design, functionality, and earthquake resistance.

This is a modularized painting unit. It can be flexibly placed in any direction. Making the most of this feature can help achieve line designs that will realize great energy and space saving.

Overhead conveyor with hanger system for use in the pretreatment and electrodeposition processes. Chain conveyors are used for the treatment process itself, whereas Friction conveyors are used before and after the treatment process.

Mono-Track conveyor is a hanger type overhead conveyor applied to the undercoat process.

This is a revolutionary system which achieves drastic energy savings and a high level of environmental friendliness by recovering NMP(N-Methyl-2-Pyrrolidone) used in the manufacturing process of lithium-ion batteries.

By examining the off-site noise generated by outdoor units, Taikisha designs optimal sound-reducing systems (in terms of cost and pressure loss) to meet the performance requirements.

Dry decoration technology provides the exteriors of automobiles with film decoration (dry decoration) by applying films through vacuum-pressure molding technology instead of the conventional spray coating (wet coating).

Odret can handle gases with any component and concentration, and oxidize and decompose almost every harmful or malodorous component with a high treatment efficiency and consistency.

Our new air seal at the opening of the flat type oven greatly reduces heat loss compared to conventional air seals.

Taikisha concluded an agreement with Kansai University to implement noise barriers applying the edge-effect suppression theory. Based on these principles, we developed a soundproofing system for air conditioner outdoor units.

Taikisha has a range of the main equipment required for painting lines to provide to our customers, including painting machines, gear pumps, CCV, paint guns, and dozers.

Our solution is to recycle exhaust from a paint booth and reduce air-conditioning energy consumption. By introducing heat pumps to the heat source of the recycling HVAC system, we aim to further achieve energy conservation and CO₂ reduction.

The paint feeding flow control system automatically controls the paint flow rate so that only the required amount is used at the required time, contributing to conserving energy and reducing VOCs.

The system can handle both upper and lower surfaces and a broad painting area for large jobs.

Taikisha's rinse systems achieve a high paint recovery rate with UF(Ultra-Filtration) or RO(Reverse Osmosis).

Pallet conveyor is an overhead pallet conveyor applied in the undercoat process.

This silencing system focuses on the fact that sound comes in waves, and splits the original sound into two paths with differing lengths to reduce noise through superimposition with the confluent section.

Pendulum conveyor is a skid-type overhead conveyor applied to pretreatment and electrodeposition processes.

The use of microbubbles in the degreasing and cleaning process (pre-cleaning process) provides an efficient degreasing system.

The resonant-type silencer is a sound dampening system that alters the phases of sound and then synthesizes them to utilize their property of mutually canceling each other.

This is a rotary conveyor system that can improve coating quality in pretreatment and electrodeposition processes, shorten the process length, and reduce running costs

Rotary RTO includes a regenerative heat exchanger with rotary changeover valves. Horizontal Rotary RTO is new type of RTO with significantly reduced unit height by having a switching valve installed on the side of the conventional RTO main unit.

RTO(Regenerative Thermal Oxidizer) is energy-saving system that oxidizes and decomposes VOCs (Volatile Organic Compounds) at 850℃ or higher. It is suitable for the treatment of high concentration gases and for use as a post-treatment unit to Admat.

Dust particles in exhaust gases are always an obstacle to the VOC treatment and the recycling of booth exhaust. Our S-1 circular is a wet paint booth that uses water with the venturi effect.

This conveyor is a skid floor conveyor for painting processes, ovens and workplaces.

Sock chilling system creates uniform indoor airflows by passing the air through a cloth filter.

Spot cooling technology focuses the air conditioning in a large factory space only around the workers.

A heat storage tank is in the form of heat in an underground or aboveground water tank. It stores inexpensive night-time power, and utilizes it during the daytime, the peak hours of heat demand.

Our Symmetry Oven can raise the temperature of difficult to heat areas in the kiln, such as the outer sill at the bottom of the body, the bases of pillars, and the front floor, within a shorter period of time than traditional kilns.

This pressure regulator control system can maintain optimum conditions when activating production devices or air conditioning systems that tends to lead to a reversal of the differential pressure between rooms, or even when changing the air volume mode.

This control technology uses a direct expansion system to further reduce environmental impact. This reproduces natural environmental conditions in test chambers with high accuracy.

For manufacturing systems that require high-performance positioning, and precision measurement systems, Spacefine, with a direct expansion coil and hot gas reignition, provides energy saving, low cost, and high precision solutions.

In painting automobiles, sealing is applied for waterproof and rust prevention along joins on the underside of floors. Furthermore undercoat is applied to prevent scratches from stones while moving, stains, and corrosion. For both process, Taikisha offers optimized paint control system that are very efficiently automated.

Taikisha supports validation measurement tasks for air conditioning equipment. Alternation of the measured data is prevented from tampering with the measurement data, while greatly reducing time for summarizing data or writing reports.

Vege-factory is a fully artificially-lit, hydroponic plant factory; and the only system in the world which facilitates mass-growing of crisphead (iceberg) lettuce.

Taikisha offers highly efficient and economical odor control devices for paint-drying oven exhaust and VOC treatment systems for paint booth exhaust.

Up to now, electrodeposition resulted in wastewater, but recycling water used in washing after the forming process not only cuts the amount of wastewater, but also reduces the cost of manufacturing DI water(de-ionized water) for use in washing.

A wind tunnel is used to artificially generate wind. By measuring the aerodynamic characteristics in a wind tunnel, data for product development and design can be obtained.

Zero Clear Coating removes stains with only water while maintaining the same level of quality. Taikisha is steadily employing these special coating properties for products that present a major burden for cleaning when used in painting factories.